Concrete Driveways
New concrete driveways, extensions and crossovers built for Noosa's coastal and hinterland blocks. Plain, exposed, coloured or stamped finishes. Call Noosa Concreters today!
Learn More →
Concrete Slabs in Noosa, QLD
House slabs, shed slabs, garage floors and granny-flat bases poured to spec on sandy coastal and clay hinterland soils. Call Noosa Concreters today!
Request a Free Quote
Concrete Slabs in Noosa for Sheds, Garages, Granny Flats and Home Extensions
We pour concrete slabs across the Noosa Shire, from shed and carport slabs in the hinterland to garage floors and granny flat bases on the coast. A slab only lasts as long as the ground under it. So every job starts with the base: we strip the topsoil, then lay and compact crusher dust or road base with a plate compactor or roller. After that we set the formwork to the right levels. On engineered jobs, we follow the engineer's drawings for edge beams, thickenings and reinforcing.
Noosa ground varies a lot over a short distance. Around Noosaville, Tewantin and Sunshine Beach you're often on loose coastal sand that needs good compaction. Out towards Cooroy, Pomona and Doonan you can hit reactive clay that swells after a wet spell and shrinks again in a dry winter. On the coast, salt air can reach the steel if the reinforcing mesh sits too close to the surface. We set mesh on bar chairs for proper cover and lay a polyethylene vapour barrier underneath. Saw-cut control joints go in at the right time, so any shrinkage cracking follows a straight line instead of wandering across your floor.
Our subtropical weather shapes how we pour. Summer storms can roll in mid-afternoon, and high humidity changes how the surface bleeds and when it's ready to trowel. We watch the forecast, book the concrete truck and pump early, and keep covers on site in case the sky turns. If the slab sits next to your house, it often makes sense to pour paths and patios or a new driveway at the same time. That way the levels and falls match and the whole area drains away from the building.
- Shed, carport and garage slabs with thickened edges for wall framing and roller doors
- Granny flat and extension slabs poured to engineer's drawings and AS 2870 site classification
- Site cut, levelling and compacted crusher dust or road base preparation
- Reinforcing mesh on bar chairs with correct cover for coastal salt-air exposure
- Polyethylene vapour barrier and setout for plumbing penetrations
- Rainwater tank pads and air-conditioning or pool-equipment plinths
- Machine or hand trowel, broom or float finishes to suit the slab's use
- Saw-cut control joints and curing compound applied after the pour
How We Prepare and Pour Concrete Slabs in Noosa
From site cut and compacted base to steel, pour and cure
Step 1: Site Check, Setout and Ground Assessment
We walk the site and check access for the concrete truck and pump. We also look at the soil, whether that's coastal sand or hinterland clay. Then we peg out the slab, confirm the finished floor level, and check any engineer's drawings or council approvals you have.
Step 2: Excavation, Base Compaction and Formwork
We strip the topsoil and roots, then cut the site level. Crusher dust or road base goes down in layers and gets compacted with a plate compactor or roller. After that we fix timber or steel formwork to height and dig out any edge beams or thickenings.
Step 3: Vapour Barrier, Steel and Pre-Pour Inspection
We lay a polyethylene vapour barrier, tape the joins and seal around plumbing penetrations. Reinforcing mesh and trench bars go onto bar chairs, so the steel sits at the right depth in the concrete. On engineered slabs, your certifier or engineer inspects the steel before we book the pour.
Step 4: Pour, Screed, Trowel Finish and Cure
Concrete goes in by truck chute or line pump. We vibrate it to remove air pockets and screed it to level, then bull float the surface. Once it has firmed up, we trowel it to the finish you've chosen, cut the control joints, and apply curing compound to slow moisture loss in our heat.
What a Properly Built Slab Gives Your Noosa Property
Solid ground for sheds, garages and granny flats in coastal and hinterland conditions
A Level Floor That Stays Level
A well-compacted base and correct reinforcing stop the slab settling into soft sand or moving with swelling clay. Your shed doors keep closing properly. Your garage floor stays flat enough for shelving, a workbench or a car hoist.
Dry Floors Through the Wet Season
The vapour barrier stops ground moisture from rising through the slab and into your stored gear, tools or floor coverings. Correct levels and falls around the slab move stormwater away. That way it doesn't pool against the walls during heavy summer rain.
Fewer Cracks and Less Rust Staining
Saw cuts placed at the right spacing and time guide shrinkage, so cracks stay neat and hidden in the joints. Proper steel cover keeps salty coastal air and moisture away from the mesh. That helps avoid the rust stains and spalling you see on older slabs near the beach.
Why Noosa Owners Trust Us With Their Shed and House Slabs
We Know Sand Country and Clay Country
Preparing a slab base in Sunshine Beach sand is a different job from preparing one on reactive clay near Cooroy or Pomona. We adjust excavation, compaction and reinforcing to suit the ground you've actually got. We don't use one method for every block.
Pours Planned Around Subtropical Weather
We book early pours in summer to beat the heat and the afternoon storms. Our crews carry covers and curing compound as standard. If the forecast turns, we move the pour rather than risk a slab you'll be living with for decades.
Comfortable Working With Owner-Builders and Builders
We work from engineer's drawings and set out plumbing penetrations with your plumber. We also coordinate inspections with your certifier. Owner-builders get a straight explanation of what happens at each stage and what they need to organise.
One Crew for the Slab and Everything Around It
We also pour driveways, paths, patios and decorative finishes. That means the levels, falls and joints line up across your whole site, and you deal with one team instead of several.
Concrete Slab Questions From Noosa Homeowners and Owner-Builders
Common questions answered
Do I need an engineer for a shed or granny flat slab in Noosa?
Most granny flats, extensions and many larger sheds need an engineered slab design and building approval through a certifier. Smaller garden sheds may not, depending on their size and use. We can look at your plans and tell you what's likely needed before we quote.
What affects the cost of a concrete slab?
The main factors are slab size and thickness, how much site cut or fill is needed, and the soil type. Edge beams and thickenings, the concrete strength, and access for the truck or pump also matter. A sloping hinterland block with clay will usually cost more to prepare than a flat sandy block in Noosaville, so we quote each job after seeing the site.
How soon can I walk on or build on my new slab?
It depends on the concrete mix, the weather and what you're putting on it. Foot traffic comes well before framing, and framing comes well before heavy vehicles or a loaded shed. We'll give you clear guidance for your slab on the day of the pour.
What happens if it rains on pour day?
Light drizzle before the pour usually isn't a problem. Heavy rain on fresh concrete can wash out the surface and weaken it. We watch the forecast closely and move the pour if a storm is likely, and we keep plastic covers on site to protect the slab if weather arrives unexpectedly.
Does a concrete slab need sealing or maintenance?
A plain shed or garage slab generally needs little more than sweeping and keeping water from pooling along its edges. If you want to resist oil stains or make cleaning easier, a penetrating or acrylic sealer is worth considering. Check the edges after big wet seasons too, and fill any soil erosion around the slab before it undermines the base.
Concrete Slabs Service Areas
We provide Concrete Slabs throughout Noosa, QLD and surrounding suburbs.
Don't see your area? Contact us to check if we service your location!
View All Areas